When building a shed, we are always faced with the question of what features should a standard shed have?
In answer to this question, we must first say that a standard shed is a shed in which all international standards and laws are observed. In the case of a shed, its quality control is done and inspected by quality control units, and Upon completion of the work, if all the points of the standard are observed, it will receive the standard certificate. A standard shed should use standard shed materials and quality equipment according to customer expectations and demands, as well as the type of shed application.
Items that are considered in the design and construction of the shed include the height, slope and standard characteristics of the shed that the customer wants, the cost of construction and the type of use of the shed and the time considered by the customer to design and Build it.
Items that should be considered in the construction of the steel structure of the shed include roof columns, struts, wall posts, bracing of columns and roofing of the structure.
o Use standard and quality raw materials in the construction of the shed
o Must have high resistance
o Be ready for delivery at the time specified by the customer
o Have all national and international standards and tests and have received the standard mark
o The weight of the shed is according to the customer's opinion
o The use of modern and advanced equipment in the construction of sheds
o The cost is in accordance with the agreement
The rules for building a shed determine the height of a shed between 4 and 25 meters, which usually varies from 6 to 12 meters.
Slope in standard shed
The small-opening shed uses a slope between 20% and 15%, but the slope is usually between 10% and 30%.
Dimensions in standard shed
The dimensions of the shed are determined based on the weather conditions, the type of use of the shed, the amount of cost and the iron consumed according to certain rules.
Free space for fire around the shed
In the laws, the width of the fire area is determined between 3 to 6 meters depending on the type of activity and the place of its construction. In some special cases, this free area is 10 meters for the traffic of fire engines.
The height of the shed in the crown is determined according to the slope of the roof and its width, which is usually between 4 to 20 meters.
• Install columns
• Install shed behavior
• Installation of perlines and pads
• Bagging
• Installation of shed frames and finishing work
At the end of the mentioned steps and after installing the skeleton of the shed, the frames and its final supports are installed. At this stage, it is necessary to pay attention to the construction of the sack. In floor construction operations, usually the concrete type is the best type of flooring. The amount of load on the columns and also the strength of the structure must be considered, so neglecting the safety of the shed can have irreparable consequences.